|
Epic Resins complete line of epoxy resin and polyurethane electrical potting and encapsulating compounds for coils are designed to have superior electrical insulating properties. Our materials come in a wide range of viscosities specially designed for difficult to impregnate coil assemblies. Below are just a few examples of materials that are being used today. Epic 0156 Epic 0156 is a single component 100% solids epoxy resin system designed for impregnation of coils, transformers, motors and other electrical items needing insulating. Epic 0156 has outstanding shelf stability, low viscosity and good electrical properties.
 Epic R3521/H5094
EPIC R3521/H5094 is a black two component epoxy potting compound. Epic R3521/H5094 features a convenient 1:1 mix ratio, low viscosity and ambient temperature cure. Epic R3521/H5094 has been developed as a production friendly, room temperature cure electrical potting system for the impregnation of high voltage coils.
 Epic S7214
EPIC S7214 is a two component polyurethane casting compound. S7214 has been designed with a fast gel time and rapid hardness development. S7214 has been formulated for applications where excellent chemical resistance at ambient and elevated temperatures is an important design criteria. When mixed, S7214 results in dark green colored castings.
Epic S7207 EPIC S7207 is a two component elastomeric polyurethane system designed for potting electrical components. It features a high dielectric strength and hardness in the mid Shore A range.
 Epic S7318
Epic S7318 is a two component urethane potting compound that is designed for high voltage ignition coils. S7318 features low hardness, low mixed viscosity and a long pot life at room temperature. Epic Resins S7318 offers excellent performance over a wide temperature range, it is especially suited for under the hood automotive applications.
|
