Epic Resins manufactures various thermally conductive potting and encapsulating compounds to meet your electrical insulation needs when it comes to the manufacturing of your relays, capacitors, or resistors. Epic Resins thermally conductive potting compounds can be designed to fit your requirements for processing as well as end use.
Epic 0154
Epic 0154 is a low-temperature cure, thermally conductive potting compound for electrical components. Epic 0154 features low temperature cure, good electrical properties, minimal settling characteristics and good heat transfer in a single component epoxy. Epic 0154 has excellent shelf life stability for a one component heat cure epoxy resin.
Epic R1009/H5017
Epic R1009/H5017 is a filled, high viscosity, thermally conductive epoxy resin system. The resin is stabilized to permit successful use of dispensing equipment as well as manual batch processing. R1009/H5017 is a room temperature electrical potting compound that has been successfully used in a variety of applications such as capacitors, diodes, resistors and torchheads.
Epic 0126
Epic 0126 is a thermally conductive potting compound and/or adhesive for electrical components featuring good electrical properties, minimum settling characteristics and good heat transfer in a single component epoxy. Applications for 0126 include coils, electronic encapsulation and relay encapsulation.
Epic S7076
Epic S7076 is a two component, 100% reactive, electrically conductive epoxy compound. S7076 has been designed as cushioning compound to act as an interface between the metal pole piece and the rigid epoxy on an electrical bushing. S7076 eliminates stress fractures in the epoxy compound that results in corona discharge failures. Epic S7076 adheres well to most metals and is designed to prevent running and dripping during application.
Epic S7133
Epic S7133 is a general purpose, two component, thermally conductive epoxy potting/casting compound. Epic S7133 has been designed with a convenient 1:1 mix ratio by weight or volume and uses a less abrasive filler making S7133 suited for meter-mix dispense applications. Epic S7133 lends itself well to applications where good electricals and good thermal conductivity are required in a room temperature curing system.
Epic S7188-02
Epic S7188-02 is a fire resistant, two component, filled epoxy potting and casting system. Epic S7188-02 features a low mixed viscosity to allow for complete air release, a convenient mix ratio and very low shrinkage upon cure. Epic S7188-02 is recognized UL 94V-0 at 5.7 mm.
Epic R1015/H5005
Epic R1015/H5005 is an epoxy compound that excels as a potting compound in a variety of electronic applications. The major features of the system include a stabilized filler to reduce settling and minimal development of stresses after curing. The latter feature especially qualifies this system for use with delicate and heat sensitive electronic packages.
Epic R1000-01/H5000-01
Epic R1000-01 is a filled high viscosity, modified epoxy resin. The resin is stabilized to permit successful use of dispensing equipment, as well as manual batch processing. Room temperature and elevated temperature curing options are available. When combined with appropriate hardeners, Epic R1000-01 resin has been successfully used in a variety of applications such as capacitors, resistors, diodes and torchheads.
Epic S7397-01
Epic S7397-01 is a two component electrical grade potting resin. Epic S7397-01 is designed with a convenient 1:1 by weight or volume mix ratio along with a long gel time and slow cure. Epic Resins S7397-01 is non-blushing, resulting in attractive parts when cured. S7397-01 is recognized by UL, meeting the 94 V-0 fire retardancy standard.
