Epic Resins epoxy resin and polyurethane encapsulating compounds are designed to protect your sensors from the environment. Whether you are manufacturing an under the hood sensor for an automotive application or a sensor that must withstand a harsh chemical environment, Epic Resins will work with you to select or design a potting compound to meet your needs.
Epic S7151 - 2 Component Epoxy Resin Electrical Potting/Casting Compound
Epic S7151 is a two component general purpose epoxy resin electrical potting/casting compound. Epic S7151 is an excellent choice for many electrical potting applications and features a meter-mix friendly 3:1 mix ratio, very low shrinkage and good adhesion to both metal and plastic cases. S7151 retains a high gloss in the cured state resulting in very attractive parts.
Epic S7224 - 2 Component Epoxy Potting Compound
Epic S7224 is a two component epoxy potting compound. S7224 is thermally conductive in order to transfer heat out of parts potted with it. Epic S7224 is especially useful in harsh, under-the-hood automotive applications requiring a durable, chemically resistant epoxy potting compound.
Epic S7341 - 2 Component Epoxy Potting/Encapsulating Compound
Epic S7341 is a two component epoxy potting and encapsulating compound designed with a low exotherm and a convenient 2:1 by volume mix ratio. Because of its high clarity, Epic S7341 is used in applications where items such as barcodes must be read through the potting compound.
Epic S7379 - 2 Component Epoxy Potting Compound
Epic S7379A/B is a two component epoxy potting compound designed to provide crack resistance in applications requiring harsh thermocycling of the encapsulated part. Epic S7379 displays good adhesion to most metal and plastic cases. With these two characteristics, Epic S7379 is an excellent choice for applications encountering problems due to moisture infiltration.
Epic R1016/H5008 - Impact Resistant Potting System
EPIC R1016/H5008 is an impact resistant potting system that has been qualified per NAV AIR drawing 790AS743. The system has been approved especially effective for potting electronic components used in a variety of ballistic vehicles. Delicate components, e.g. glass diodes, should be coated with a resilient material such as silicone rubber to minimize stresses developed during curing.
